Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P0010, P0016, P0017, P0018, P0019, P0335, P0336, P0340, P0341, P0345, P0346, P0365, P0366, P0390, P0391 = Not set
Desired Camshaft Position & Camshaft Position = 6 to 26°
Desired Camshaft Position = Does not vary greater than 3° - For greater than 2 s
ECT Sensor = -12 to 72°C (19.4 to 161.6°F)
Engine = Running
Ignition Voltage = Greater than 11 V

Frequency the DTC runs = Continuously - After the running conditions are met