Turbocharger Air Inlet Adapter Replacement - Bank 2

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Auxiliary Air Cleaner Outlet Duct Replacement Remove wiring harness retainer from turbocharger air inlet adapter and reposition harness.
1	Turbocharger Air Inlet Adapter Bolt [ 2x ] CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb/in)
2	Turbocharger Air Inlet Adapter
3	Turbocharger Air Inlet Adapter Seal Procedure Install a NEW seal.