Engine Coolant Temperature Sensor Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Cooling System Draining and Filling (LSY GE 47716) , or Cooling System Draining and Filling (LSY Static Fill) , or Cooling System Draining and Filling (LGY Static Fill) , or Cooling System Draining and Filling (LGY GE 47716) Fuel Injection Fuel Rail Noise Shield Replacement (Upper) , or Fuel Injection Fuel Rail Noise Shield Replacement (Lower) Engine Coolant Thermostat Housing Replacement Engine Coolant Thermostat Housing Replacement (LGY) .
1	Engine Coolant Temperature Sensor CAUTION: Refer to Component Fastener Tightening Caution . Procedure Electrical Connector @ Engine Coolant Temperature Sensor - Remove Tighten 9 N.m (80 lb/in)

Callout

Component Name

Preliminary Procedures

Engine Coolant Temperature Sensor

CAUTION:

Procedure
Electrical Connector @ Engine Coolant Temperature Sensor - Remove
Tighten
9 N.m (80 lb/in)