Camshaft Position Actuator Valve Solenoid Replacement - Bank 2 (Left Side) Intake

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Charge Air Cooler Cover Replacement Disconnect the electrical connector.
1	Camshaft Position Actuator Solenoid Valve Bolt CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb/in)
2	Camshaft Position Actuator Solenoid Valve Procedure Lubricate the O-ring seal with clean engine oil.

Callout

Component Name

Preliminary Procedures

Camshaft Position Actuator Solenoid Valve Bolt

CAUTION:

Tighten
10 N.m (89 lb/in)

Camshaft Position Actuator Solenoid Valve
Procedure
Lubricate the O-ring seal with clean engine oil.