Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- NOTE:
Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
Apply proper sealant. Adhesives, Fluids, Lubricants, and Sealers
Lower Oil Pan (1) - Install NEW
- Lower Oil Pan Bolt (2) - Install and tighten [ 12x ] 8.5 N.m (75 lb/in)
- Lower the vehicle.
- Fill the engine oil to the proper level with NEW engine oil.
- Start the engine and inspect for leaks.
CAUTION:
Refer to Fastener Caution