Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Driver or Passenger Seat Back Frame Fastener | 45 N.m (33 lb ft) |
| Driver or Passenger Seat Bolt | 45 N.m (33 lb ft) |
| Driver or Passenger Seat Inner Recliner Finish Cover Fastener | 4 N.m (35 lb in) |
| Front Seat Cushion Front Extension Frame Fastener | 4.7 N.m (42 lb in) |
| Front Seat Cushion Front Finish Cover Fastener | 4 N.m (35 lb in) |
| Front Seat Cushion Outer Finish Cover Fastener- Front | 4 N.m (35 lb in) |
| Front Seat Cushion Outer Finish Cover Fastener- Rear | 4 N.m (35 lb in) |
| Rear Seat Armrest Fastener | 3 N.m (27 lb in) |
| Rear Seat Back Bolster Nut | 9 N.m (80 lb in) |
| Rear Seat Back Cushion Hinge Fastener | 45 N.m (33 lb ft) |
| Rear Seat Back Cushion Latch Bolt | 45 N.m (33 lb ft) |
| Rear Seat Back Outer Pivot Bolt | 23 N.m (17 lb ft) |