1-3-5-6-7-8-9 Clutch Assembly
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| 550 | Direct Overdrive Internal Gear Retaining Ring |
| 551 | Direct Overdrive Internal Gear |
| 553 | Turbine Shaft Retainer Ring |
| 554 | 1-3-5-6-7-8-9 Clutch Hub |
| 555 | 1-3-5-6-7-8-9 Clutch Backing Plate - Selective |
| 556 | 1-3-5-6-7-8-9 Fiber Clutch Plate |
| 557 | 1-3-5-6-7-8-9 Steel Clutch Plate |
| 559 | 1-3-5-6-7-8-9 Clutch Piston Return Spring |
| 560 | 1-3-5-6-7-8-9 Clutch Piston Seal - Inner |
| 561 | 1-3-5-6-7-8-9 Clutch Piston |
| 562 | 1-3-5-6-7-8-9 Clutch Piston Dam Seal |
| 563 | 1-3-5-6-7-8-9 Clutch Piston Dam |
| 564 | 1-3-5-6-7-8-9 Clutch Piston Dam Seal |
| 565 | 1-3-5-6-7-8-9 Clutch Piston Dam Retaining Ring |
| 566 | Turbine Shaft Seal |
| 567 | Turbine Shaft Seal |
| 568 | Turbine Shaft |
| 569 | Turbine Shaft Seal |
| 570 | Turbine Shaft Seal |
| 571 | Output Sun Gear Thrust Bearing Assembly |
| 572 | Output Sun Gear |