LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 441 (Automatic Transmission - 10L60 (MQ2), 10L80 (MHS) Or 10L90 (MHX) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Propeller Shaft Transmission Flange Removal >> Single Use Fasteners and Components

Single Use Fasteners and Components

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Front Propeller Shaft Nut

GM3996634Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts in the following chart represent components shown in graphic above.
Callout Component Name
1 Front Propeller Shaft Nut
CAUTION:

Do not reuse the flange nut. Reusing the flange nut may cause damage to the transmission.

NOTE:

Remove and DISCARD the propeller shaft flange nut.


Special Tools 
DT-45012  Holding Fixture
For equivalent regional tools, refer to Special Tools .
2 Propeller Shaft Transmission Flange
NOTE:

If the propeller shaft transmission flange is not easily removed with DT-45012  holding fixture use DT-38416-B  harmonic balancer remover to remove the flange.

Special Tools

  • DT-38416-B  Harmonic Balancer Remover
  • DT-45012  Holding Fixture

For equivalent regional tools, refer to Special Tools .