Single Use Fasteners and Components

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Front Propeller Shaft Nut

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
1	Propeller Shaft Transmission Flange
2	Front Propeller Shaft Nut CAUTION: Refer to Fastener Caution . Procedure Install a NEW nut. Tighten 105 N.m (77 lb ft) Special Tools DT-45012 Holding Fixture For equivalent regional tools, refer to Special Tools .
3	Output Shaft CAUTION: Stake the flange nut onto the output shaft. Use the two staking grooves on the shaft to locate the staking points. Failure to stake the flange nut may result in damage to the transmission.