Cylinder Head Bolt Sequence
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
| Cylinder Head Bolt Sequence | |||||
|---|---|---|---|---|---|
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
| Metric (English) | |||||
| 1 | Cylinder Head Bolt-M8 [10x] | - | - | First Pass: 30 N.m (22 lb ft) Final Pass: 190 Degrees |
Cylinder Head Replacement |
| 2 | Cylinder Head Bolt-M8 [3x] | - | - | First Pass: 20 N.m (15 lb ft) Final Pass: 125 Degrees |
|
| 3 | Cylinder Head Bolt-M6 [3x] | - | - | 15 N.m (11 lb ft) | |
| 4 | Cylinder Head Bolt-M6 [2x] | Yes | - | First Pass: 10 N.m (89 lb in) Final Pass: 120 Degrees |
|