Special Tools
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- DT-36850 Transjel Lubricant
- DT-45053 Universal Clamp Press
Equivalent regional tools: Special Tools
Apply DT-36850 Transjel Lubricant onto the stator shaft support seal for ease of installation. Do not force the support into place.
- Take the transmission out of park.
- Install DT-45053 Universal Clamp Press (1) to the Automatic Transmission Case Cover (2).
- Automatic Transmission Case Cover (2) - Install
- Rotate the input shaft back and forth to engage the reaction carrier assembly to the low clutch roller.
- Input Shaft Support Bolt (3) - Install NEW and hand tighten [12x]
- Input Shaft Support Bolt (3) - Tighten in sequence - Fastener Specifications
CAUTION:
Refer to Fastener Caution