Special Tools

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

DT-8001 Dial Indicator

Equivalent regional tools: Special Tools

Courtesy of GENERAL MOTORS COMPANY

Using DT-8001 Dial Indicator (1), set up the measurement as shown.
1-3-5-6-7-8-9 Clutch Plate (2)-Selective - Measure
Zero out the DT-8001 Dial Indicator (1), then lift the clutch plate stack upwards and record the measurement.
Repeat the measurement every 90 degrees from the measurement in step 3, completing 4 measurements.
Find the average of these four measurements from step 2 and step 3. Record this as the clutch travel. Use this number to find the correct clutch backing plate. 1-3-5-6-7-8-9 Clutch Backing Plate Specifications