Special Tools
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
DT-52697 Clearance Gage Plate
Equivalent regional tools: Special Tools
Using DT-52697 Clearance Gage Plate (1), set up the measurement as shown.
- 1-2-3-4-5-6-Reverse Clutch Apply Plate (2) - Measure
- Measure from the top of the 1-2-3-4-5-6-Reverse Clutch Apply Plate (2) to the top of the DT-52697 Clearance Gage Plate (1) as shown and record the measurement.
- Repeat the measurement 180 degrees from the measurement in step 3.
- Find the average of these two measurements from step 3 and step 4. Record this as dimension A.
Using DT-52697 Clearance Gage Plate (1), set up the measurement as shown.
- 1-2-3-4-5-6-Reverse Clutch Piston Return Spring (2) - Measure
- Zero to the 1-2-3-4-5-6-Reverse Clutch Piston Return Spring (2), then Measure to the case mating surface to the top of the DT-52697 Clearance Gage Plate (1) as shown and record the measurement.
- Repeat the measurement 180 degrees from the measurement in step 8.
- Find the average of these two measurements from step 8 and step 9. Record this as dimension B.
- Subtract dimension B from dimension A to determine the dimension C.
- Subtract 30.76 mm (1.211 in) from the dimension C to determine the clutch pack travel specification. 1-2-3-4-5-6-Reverse Clutch Apply Plate Specifications