LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Fender Front Brace Replacement >> Installation Procedure

Installation Procedure

  1. GM5475532Courtesy of GENERAL MOTORS COMPANY

    Front Fender Front Brace (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Front Fender Bolt (1) - Install and tighten [4x] - Fastener Specifications 
  3. GM5409324Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Guide (3) - Install

  4. Front Bumper Fascia Guide Bolt (2) - Install and tighten [2x] - Fastener Specifications
  5. Headlamp Bolt (1) - Install and tighten - Fastener Specifications
  6. GM5414830Courtesy of GENERAL MOTORS COMPANY

    Connect all electrical connectors.

  7. Front Headlamp (2) - Install
  8. Secure the front headlamp guide pin to the front bumper fascia guide (1).
  9. GM5414822Courtesy of GENERAL MOTORS COMPANY

    Secure the wiring harness retaining tab.

  10. Headlamp Bolt (1) - Install and tighten - Fastener Specifications
  11. GM5414818Courtesy of GENERAL MOTORS COMPANY

    Headlamp Bolt (1) - Install and tighten [3x] - Fastener Specifications

  12. GM5408645Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia (1) - Install - Front Bumper Fascia Removal and Installation

  13. After installation, aim the front headlamps. Front Headlamp Aiming (with Horizontal Adjustment) , or Front Headlamp Aiming (without Horizontal Adjustment)
scientia non olet · About LEMON Manuals