Removal Procedure

WARNING:

WARNING:

Disable the SIR system. SIR Disabling and Enabling
Courtesy of GENERAL MOTORS COMPANY

With a flat bladed plastic trim tool, start at the front and work your way back to release the clips.
Instrument Panel Outer Trim Cover - Right Side (1) - Remove
{If equipped} Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Body Control Module Bracket Bolt (1) - Remove
Unlock and lower the body control module bracket (2).
Disconnect and reposition harness as necessary.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Insulator Bolt (1) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a plastic trim tool if necessary.

Release the front edge of the front console extension panel from the instrument panel lower trim panel insulator (1).
Instrument Panel Lower Trim Panel Insulator (1) - Remove
Disconnect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Airbag Nut (1) - Remove [2x]
Instrument Panel Lower Airbag - Passenger Side (2) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Compartment Bolt (1) - Remove [5x]
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Compartment (1) - Remove
Disconnect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Using a flat - bladed plastic trim tool, release the retaining clips.
Instrument Panel Trim Pad (1) - Remove