Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Disconnect the hood primary latch release cable end retainer from the hood primary latch release cable handle (1).
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator Retainer (1) - Remove
Instrument Panel Insulator Bolt (2) - Remove [2x]
Instrument Panel Insulator Nut (3) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a plastic trim tool if necessary.

Release the tabs from the instrument panel lower trim panel insulator (1).
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator (1) - Remove
Disconnect the electrical connector.
Transfer components as necessary.