Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary to access the retaining clips.
Using a flat - bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Right Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary to access the retaining clips.
Using a flat - bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Left Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Rear Cover Bolt (1) - Remove [2x]
Front Floor Console Rear Trim Panel (2) - Remove
Disconnect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt (1) - Remove [6x]
Front Floor Console Bracket Bolt (2) - Remove [2x]
Release the tabs (3) on both sides of the front floor console.
Courtesy of GENERAL MOTORS COMPANY

Slide the front floor console (1) enough to clear the instrument panel lower center trim panel.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Variable 1 Liner (1) - Remove
Use a plastic trim tool to release the transmission control lever boot (2) from the front floor console trim plate.
Disconnect the electrical connector (3).
Front Floor Console Trim Plate Bolt (4) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Remove the automatic transmission control lever knob (1) by pulling up and releasing the retainer.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Trim Plate (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Automatic Transmission Range Selector Lever Cable Bolt (1) - Remove
Automatic Transmission Range Selector Lever Cable (2) - Release
Disconnect the front floor console wiring harness (3) from the body wiring harness.
Courtesy of GENERAL MOTORS COMPANY

Wireless Charging System Module Bolt (1) - Remove [4x]
Wireless Charging System Module (2) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Cup Holder Bolt (1) - Remove [8x]
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Cup Holder (1) - Remove
Disconnect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Armrest Bolt (1) - Remove [7x]
Front Floor Console Armrest (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Release the clips on the front floor console wiring harness (1).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Quantity of clips and routing of the front floor console wiring harness may vary based on option content.

Release the wiring harness clips and remove the front floor console wiring harness (1).