LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Front Floor Console Removal and Installation (with MQA) >> Removal Procedure

Removal Procedure

  1. GM5479957Courtesy of GENERAL MOTORS COMPANY

    Reposition the seat as necessary to access the retaining clips.

  2. Using a flat - bladed plastic trim tool, release the retaining clips.
  3. Front Floor Console Extension Panel - Left Side (1) - Remove
  4. GM5479956Courtesy of GENERAL MOTORS COMPANY

    Reposition the seat as necessary to access the retaining clips.

  5. Using a flat - bladed plastic trim tool, release the retaining clips.
  6. Front Floor Console Extension Panel - Right Side (1) - Remove
  7. GM5482680Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Bolt (1) - Remove [6x]

  8. Front Floor Console Bracket Bolt (2) - Remove [2x]
  9. Release the tabs (3) on both sides of the front floor console.
  10. GM5482681Courtesy of GENERAL MOTORS COMPANY

    Slide the front floor console (1) enough to clear the instrument panel lower center trim panel.

  11. GM5502868Courtesy of GENERAL MOTORS COMPANY

    Disconnect the front floor console wiring harness from the body wiring harness.

  12. With the aid of an assistant, remove the front floor console (1) from the vehicle.