Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary to access the retaining clips.
Using a flat - bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Left Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary to access the retaining clips.
Using a flat - bladed plastic trim tool, release the retaining clips.
Front Floor Console Extension Panel - Right Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt (1) - Remove [6x]
Front Floor Console Bracket Bolt (2) - Remove [2x]
Disconnect the front floor console harness connector on both sides of the front floor console.
Release the tabs (3) on both sides of the front floor console.
Courtesy of GENERAL MOTORS COMPANY

Slide the front floor console (1) enough to clear the instrument panel lower center trim panel.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Variable 1 Liner (1) - Remove
Use a plastic trim tool to release the transmission control lever boot (2) from the front floor console trim plate.
Disconnect the electrical connector (3).
Front Floor Console Trim Plate Bolt (4) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Remove the automatic transmission control lever knob (1) by pulling up and releasing the retainer.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Trim Plate (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Automatic Transmission Range Selector Lever Cable Bolt (1) - Remove
Automatic Transmission Range Selector Lever Cable (2) - Release
Disconnect the front floor console wiring harness (3) from the body wiring harness.
Courtesy of GENERAL MOTORS COMPANY

With the aid of an assistant, remove the front floor console (1) from the vehicle.