LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Front Floor Console Front Cover Replacement (with MQA) >> Removal Procedure

Removal Procedure

  1. GM5479957Courtesy of GENERAL MOTORS COMPANY

    Reposition the seat as necessary to access the retaining clips.

  2. Using a flat - bladed plastic trim tool, release the retaining clips.
  3. Front Floor Console Extension Panel - Left Side (1) - Remove
  4. GM5479956Courtesy of GENERAL MOTORS COMPANY

    Reposition the seat as necessary to access the retaining clips.

  5. Using a flat - bladed plastic trim tool, release the retaining clips.
  6. Front Floor Console Extension Panel - Right Side (1) - Remove
  7. GM5482680Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Bolt (1) - Remove [6x]

  8. Front Floor Console Bracket Bolt (2) - Remove [2x]
  9. Disconnect the front floor console harness connector on both sides of the front floor console.
  10. Release the tabs (3) on both sides of the front floor console.
  11. GM5482681Courtesy of GENERAL MOTORS COMPANY

    Slide the front floor console (1) enough to clear the instrument panel lower center trim panel.

  12. GM5502705Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Variable 1 Liner (1) - Remove

  13. Front Floor Console Trim Plate Bolt (2) - Remove [2x]
  14. GM5502706Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate (1) - Remove

  15. Disconnect the electrical connectors.
  16. GM5488316Courtesy of GENERAL MOTORS COMPANY

    Wireless Charging System Module Bolt (1) - Remove [4x]

  17. Front Floor Console Front Cover (2) - Remove