LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Front Floor Console Cup Holder Replacement (with M5N) >> Installation Procedure

Installation Procedure

  1. GM5501921Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  2. Front Floor Console Cup Holder (1) - Install
  3. GM5501920Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Front Floor Console Cup Holder Bolt (1) - Install and tighten [8x] - Fastener Specifications 

  4. GM5488339Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  5. Wireless Charging System Module (2) - Install
  6. Wireless Charging System Module Bolt (1) - Install and tighten [4x] - Fastener Specifications
  7. GM5488424Courtesy of GENERAL MOTORS COMPANY

    Automatic Transmission Range Selector Lever Cable Bolt (1) - Install and tighten - Fastener Specifications

  8. Automatic Transmission Range Selector Lever Cable (2) - Install and tighten - Fastener Specifications
  9. Connect the front floor console wiring harness (3) to the body wiring harness.
  10. GM5487916Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate (1) - Install

  11. GM5644700Courtesy of GENERAL MOTORS COMPANY

    Install the automatic transmission control lever knob (1) then press down to engage the retainer.

  12. Carefully pull upward on the automatic transmission control lever knob (1) to ensure that the retainer is engaged.
  13. GM5487915Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Trim Plate Bolt (4) - Install and tighten [2x] - Fastener Specifications 

  14. Connect the electrical connector (3).
  15. Insert the transmission control lever boot (2) into the front floor console trim plate.
  16. Shift the transmission through each gear and ensure that the shift lever knob operates properly.
  17. Front Floor Console Variable 1 Liner (1) - Install
  18. GM5482681Courtesy of GENERAL MOTORS COMPANY

    Slide the front floor console (1) back into the instrument panel.

  19. GM5482680Courtesy of GENERAL MOTORS COMPANY

    Engage the tabs (3) on both sides of the front floor console.

  20. Connect the front floor console harness connector on both sides of the front floor console.
  21. Front Floor Console Bolt (1) - Install and tighten [6x] - Fastener Specifications 
  22. Front Floor Console Bracket Bolt (2) - Install and tighten [2x] - Fastener Specifications 
  23. GM5479956Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Right Side (1) - Install

  24. Return the seat to its original position.
  25. GM5479957Courtesy of GENERAL MOTORS COMPANY

    Front Floor Console Extension Panel - Left Side (1) - Install

  26. Return the seat to its original position.