LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 283 (Automatic Transmission - 10L60 (MQ2), 10L80 (MHS) Or 10L90 (MHX) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Wiring Harness Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4540404Courtesy of GENERAL MOTORS COMPANY

    Remove the transmission fluid filter (6). Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement 

  2. Disconnect the transmission control wiring harness from the control valve body.
  3. GM5208014Courtesy of GENERAL MOTORS COMPANY

    Remove the automatic transmission auxiliary fluid pump outlet pipe (2). Auxiliary Fluid Pump Removal

  4. GM5208028Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The bolts are marked by arrows in the valve body casting.

    Remove and DISCARD the 7 control valve body bolts (1) and the control valve body assembly (2) from the transmission.

  5. GM4974608Courtesy of GENERAL MOTORS COMPANY

    Remove the automatic transmission wiring harness (2). Control Valve Assembly and Transmission Wiring Harness Removal