LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Automatic Transmission - 10L60 (MQA) Or 10L80 (MHU) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Case Extension Assembly Removal (2WD) >> Single Use Fasteners and Components

Single Use Fasteners and Components

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Automatic Transmission Case Extension Seal

  1. GM5427455Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Before removing the automatic transmission case extension, place the transmission in a vertical position with the case extension facing up. Failure to do so may result in damage to the transmission output shaft bearing and/or sleeve.

    Automatic Transmission Case Extension Bolt (1) - Remove [6x]

  2. Allow any remaining transmission fluid to drain from the case extension.
  3. Automatic Transmission Case Extension (2) - Remove
  4. Automatic Transmission Case Extension Seal (3) - Remove and DISCARD