LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Automatic Transmission - 10L60 (MQA) Or 10L80 (MHU) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Automatic Transmission Case Front Cover Installation >> Special Tools

Special Tools

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Equivalent regional tools: Special Tools

  1. GM5428699Courtesy of GENERAL MOTORS COMPANY

    Apply DT-36850 Transjel Lubricant onto the stator shaft support seal for ease of installation. Do not force the support into place.

  2. Take the transmission out of park.
  3. Install DT-45053  Universal Clamp Press (1) to the Automatic Transmission Case Cover (2).
  4. Automatic Transmission Case Cover (2) - Install
  5. Rotate the input shaft back and forth to engage the reaction carrier assembly to the low clutch roller.
  6. CAUTION:

    Refer to Fastener Caution

  7. Input Shaft Support Bolt (3) - Install NEW and hand tighten [12x]
  8. Input Shaft Support Bolt (3) - Tighten in sequence - Fastener Specifications