Special Tools
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
DT-8001 Dial Indicator
Equivalent regional tools: Special Tools
Using all of the clutch plates, set up the measurement as shown using DT-8001 Dial Indicator (1).
- 4-5-6-7-8-9-10-Reverse Clutch Backing Plate Retaining Ring (2)-Selective - Measure
- Zero out the dial indicator, then lift the clutch plate stack upwards and record the measurement.
- Repeat the measurement every 120 degrees from the measurement in step 3, completing 3 measurements.
- Find the average of these three measurements from step 3 and step 4. Record this as the clutch travel. Use this number to find the correct clutch backing plate. Clutch Backing Plate Retaining Ring Specifications