LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.7L (L3B) - Repair Instructions - Ct4 (1 Of 6) >> Crankshaft Position Sensor Reluctor Ring Replacement >> Removal Procedure

Removal Procedure

  1. Remove the transmission. Transmission Replacement (All Wheel Drive) , or Transmission Replacement (Rear Wheel Drive)
  2. GM5150614Courtesy of GENERAL MOTORS COMPANY

    Install the EN-52476  Flywheel Holding Tool (1) through the starter mounting hole.

  3. GM5138790Courtesy of GENERAL MOTORS COMPANY

    Automatic Transmission Flex Plate Bolt (1) - Remove and DISCARD [8x]

  4. Automatic Transmission Flex Plate (2) - Remove
  5. GM5140979Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Crankshaft Position Sensor Reluctor Ring Caution .

    Crankshaft Position Sensor Reluctor Ring (1) - Remove

  6. Flywheel Locating Pin (2) - Remove
scientia non olet · About LEMON Manuals