LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 V, 4WD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary Latch Release Cable Replacement >> Installation Procedure

Installation Procedure

  1. GM5422697Courtesy of GENERAL MOTORS COMPANY

    Attach the mechanics wire to the new hood primary latch release cable (2) and guide the cable in.

  2. Install the hood primary latch release cable grommet (1) to the dash panel.
  3. GM5422700Courtesy of GENERAL MOTORS COMPANY

    Remove the mechanics wire from the hood primary latch release cable.

  4. Attach the hood primary latch release cable end retainer to the inside handle (1).
  5. GM5479409Courtesy of GENERAL MOTORS COMPANY

    Hood Primary Latch Release Cable (3) - Install

  6. Hood Primary and Secondary Latch (2) - Install
  7. Align marks to hood primary and secondary latch.
  8. Hood Primary and Secondary Latch Bolt (1) - Install and tighten [2x] - Fastener Specifications 
scientia non olet · About LEMON Manuals