Removal Procedure
Front Bumper Fascia (1) - Remove - Front Bumper Fascia Removal and Installation
Headlamp Bolt (1) - Remove [3x]
Headlamp Bolt (1) - Remove
- Release the wiring harness retaining tab.
Release the front headlamp guide pin from the front bumper fascia guide (1).
- Front Headlamp (2) - Remove
- Disconnect all electrical connectors.
Headlamp Bolt (1) - Remove
- Front Bumper Fascia Guide Bolt (2) - Remove [2x]
- Front Bumper Fascia Guide (3) - Remove
Front Fender Bolt (1) - Remove [4x]
- Front Fender Front Brace (2) - Remove