Hood Primary Latch Release Cable Replacement (without Blackwing): Notes

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Hood Primary and Secondary Latch Bolt (1) - Remove [2x]
Hood Primary and Secondary Latch (2) - Remove
Disconnect the hood primary latch release cable (3) from the hood primary latch.
Courtesy of GENERAL MOTORS COMPANY

Disconnect the hood primary latch release cable end retainer from the inside handle (1).
Courtesy of GENERAL MOTORS COMPANY

Disconnect the hood primary latch release cable grommet (1) from the dash panel.
Attach mechanics wire to the hood primary latch release cable (2) and pull the cable out.
Remove the mechanics wire from the hood Primary latch release cable.