Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Attach the mechanics wire to the new hood primary latch release cable (2) and guide the cable in.
- Install the hood primary latch release cable grommet (1) to the dash panel.
Remove the mechanics wire from the hood primary latch release cable.
- Attach the hood primary latch release cable end retainer to the inside handle (1).
Hood Primary Latch Release Cable (3) - Install
- Hood Primary and Secondary Latch (2) - Install
- Align marks to hood primary and secondary latch.
- Hood Primary and Secondary Latch Bolt (1) - Install and tighten [2x] - Fastener Specifications