LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Compartment Front Panel Replacement (LSY) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5318224Courtesy of GENERAL MOTORS COMPANY

    Front Compartment Front Panel (1) - Install

  2. GM5318217Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Front Compartment Front Panel Bolt- Left Side (1) - Install and tighten [3x] - Fastener Specifications 

  3. GM5492233Courtesy of GENERAL MOTORS COMPANY

    Front Fender Bolt- Left Side (1) - Install and tighten [2x] - Fastener Specifications 

  4. Front Compartment Front Panel Bolt- Left Side (2) - Install and tighten [3x] - Fastener Specifications 
  5. Reposition the wiring harness.
  6. GM5492240Courtesy of GENERAL MOTORS COMPANY

    Front Compartment Front Panel Bolt- Left Side (1) - Install and tighten [2x][3x]

  7. GM5318222Courtesy of GENERAL MOTORS COMPANY

    Front Compartment Front Panel Bolt- Right SideInstall and tighten [3x] - Fastener Specifications 

  8. GM5493270Courtesy of GENERAL MOTORS COMPANY

    Front Fender Bolt (1)- Right SideInstall and tighten - [2x] - Fastener Specifications 

  9. Front Compartment Front Panel Bolt- Right Side (2) - Install and tighten [3x] - Fastener Specifications 
  10. GM5493272Courtesy of GENERAL MOTORS COMPANY

    Front Compartment Front Panel Bolt- Right Side (1) - Install and tighten [2x] - Fastener Specifications 

  11. Position the wiring harness.
  12. GM5522102Courtesy of GENERAL MOTORS COMPANY

    Hood Hold Open Rod (2) - Install

  13. Hood Hold Open Rod Bolt (1) - Install and tighten [2x] - Fastener Specifications 
  14. GM5522059Courtesy of GENERAL MOTORS COMPANY

    Forward Lamp Wire Harness Ground Terminal (2) - Install [2x]

  15. Forward Lamp Wire Harness Ground Bolt (1) - Install and tighten [2x] - Ground Repair
  16. GM5522057Courtesy of GENERAL MOTORS COMPANY

    Engine Wire Harness Ground Terminal (2) - Install

  17. Engine Wire Harness Ground Bolt (1) - Install and tighten - Ground Repair
  18. GM5404539Courtesy of GENERAL MOTORS COMPANY

    Transmission Control Module Bracket (2) - Install

  19. Transmission Control Module Bracket Bolt (1) - Install and tighten - Fastener Specifications
  20. GM5482168Courtesy of GENERAL MOTORS COMPANY

    Connect the transmission control module electrical connector. (3)

  21. Battery Negative Cable Ground (2) - Install
  22. Battery Negative Cable Ground Bolt (1) - Install and tighten - Fastener Specifications
  23. GM5492238Courtesy of GENERAL MOTORS COMPANY

    Engine Control Module Bracket (4) - Install

  24. Engine Control Module Bracket Nut (3) - Install and tighten - Fastener Specifications
  25. Engine Control Module Bracket Bolt (2) Install and tighten [2x] - Fastener Specifications
  26. Air Conditioning Refrigerant Heat Exchanger Clip (1) Install
  27. GM5492236Courtesy of GENERAL MOTORS COMPANY

    Body Wiring Harness Fuse Block Bracket (2) - Install

  28. Body Wiring Harness Fuse Block Bracket Bolt (1) Install and tighten [2x] - Fastener Specifications
  29. GM5300279Courtesy of GENERAL MOTORS COMPANY

    Attach the hood primary latch release cable end retainer (1) to the latch.

  30. Install the hood primary latch release cable to the 2 retainer (2).
  31. GM5427525Courtesy of GENERAL MOTORS COMPANY

    Install the air cleaner (1) and air cleaner outlet duct (2) as an assembly.

  32. GM5427523Courtesy of GENERAL MOTORS COMPANY

    Air Cleaner Outlet Duct Clamp (2) - Tighten - Fastener Specifications

  33. Air Cleaner Bolt (1) - Install and tighten - Fastener Specifications
  34. GM5405710Courtesy of GENERAL MOTORS COMPANY

    Intake Air Duct (1) - Install

  35. GM5422178Courtesy of GENERAL MOTORS COMPANY

    Radiator Air Front Upper Baffle (1) - Install

  36. GM5422177Courtesy of GENERAL MOTORS COMPANY

    Radiator Air Upper Baffle Retainer (2) - Install [4x]

  37. Radiator Air Upper Baffle Retainer- Side (1) - Install [2x]
  38. GM5422176Courtesy of GENERAL MOTORS COMPANY

    Hood Primary and Secondary Latch (1) - Install

  39. GM5422172Courtesy of GENERAL MOTORS COMPANY

    Align the hood primary and secondary latch (1) with the marks made during removal.

  40. Hood Primary and Secondary Latch Bolt (2) - Install and tighten [2x] - Fastener Specifications 
  41. GM5313404Courtesy of GENERAL MOTORS COMPANY

    Radiator Upper Bracket- Right Side (3) - Install

  42. Radiator Upper Bracket Bolt (2) - Install and tighten [2x] - Fastener Specifications
  43. Wiring Harness Retainer (1) - Install
  44. GM5313403Courtesy of GENERAL MOTORS COMPANY

    Radiator Upper Bracket- Left Side (2) - Install

  45. Radiator Upper Bracket Bolt (1) - Install and tighten [2x] - Fastener Specifications
  46. GM5412380Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Impact Bar (2) - Install

  47. Front Bumper Impact Bar Bolt (1) - Install and tighten [8x] - Fastener Specifications
  48. Connect the wiring harness retainers.
  49. GM5485943Courtesy of GENERAL MOTORS COMPANY

    Horn (2) - Install [2x]

  50. Horn Bolt (1) - Install and tighten [2x]- Fastener Specifications
  51. Connect the electrical connectors.
  52. GM5518513Courtesy of GENERAL MOTORS COMPANY

    Intake Air Duct Retainer (1) - Install [2x]

  53. Radiator Air Lower Seal Retainer (2) - Install [2x]
  54. Radiator Air Lower Baffle Retainer (3) - Install [2x]
  55. GM5412184Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Center Support (2) - Install

  56. Front Bumper Fascia Center Support Bolt (1) - Install and tighten [2x] - Fastener Specifications
  57. GM5905659Courtesy of GENERAL MOTORS COMPANY

    Radiator Air Upper Baffle Retainer (2) Install [2x]

  58. GM5422202Courtesy of GENERAL MOTORS COMPANY

    Front End Sheet Metal Cross Brace (2) - Install

  59. Front End Sheet Metal Cross Brace Bolt (1) - Install and tighten [2x] - Fastener Specifications 
  60. GM5482482Courtesy of GENERAL MOTORS COMPANY

    Front End Sheet Metal Cross Brace- Right Side (2) Install

  61. Front End Sheet Metal Cross Brace Bolt (1) - Install and tighten [2x] - Fastener Specifications 
  62. GM5410889Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Support Brace (2) - Install

  63. Front Bumper Fascia Support Brace Bolt (1) - Install and tighten [3x] - Front Bumper Shutter Replacement
  64. GM5471814Courtesy of GENERAL MOTORS COMPANY

    Position the engine auxiliary radiator assembly (1) to the vehicle.

  65. GM5471812Courtesy of GENERAL MOTORS COMPANY

    Charge Air Cooler Bracket Bolt (1) - Install and tighten [3x] - Fastener Specifications

  66. Charge Air Cooler Upper Bracket Nut (2) - Tighten - Fastener Specifications
  67. GM5454437Courtesy of GENERAL MOTORS COMPANY

    Auxiliary Radiator Front Duct (1) - Install

  68. GM5454427Courtesy of GENERAL MOTORS COMPANY

    Auxiliary Radiator Duct Retainer (1) - Install [2x]

  69. GM5454422Courtesy of GENERAL MOTORS COMPANY

    Auxiliary Radiator Duct Retainer (1) - Install [3x]

  70. GM5470179Courtesy of GENERAL MOTORS COMPANY

    Auxiliary Radiator Rear Duct (1) - Install

  71. GM5470177Courtesy of GENERAL MOTORS COMPANY

    Auxiliary Radiator Duct Retainer (1) - Install [3x]

  72. GM5414830Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Connect all electrical connectors.

  73. Install the left and right side headlamps. (2)
  74. Secure the front headlamp guide pin to the front bumper fascia guide (1).
  75. GM5414822Courtesy of GENERAL MOTORS COMPANY
  76. Headlamp Bolt (1) - Install and tighten - Fastener Specifications
  77. GM5414818Courtesy of GENERAL MOTORS COMPANY

    Headlamp Bolt (1) - Install and tighten [3x] - Fastener Specifications

  78. GM5408645Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The front bumper fascia will rest in place by guides on the center support upper structure.

    With the aid of an assistant, install the fascia. (1)

  79. GM5407644Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Center Air Deflector Screw (1) - Install and tighten [9x] - Fastener Specifications

  80. Front Bumper Fascia Center Air Deflector Bolt (2) - Install and tighten [5x] - Fastener Specifications
  81. Front Bumper Fascia Center Air Deflector Retainer (3) - Install and tighten [2x] - Fastener Specifications
  82. GM5440614Courtesy of GENERAL MOTORS COMPANY

    Install the left side of the front bumper fascia (1) to the front bumper fascia guide (2) and the front headlamp (3).

  83. GM5440613Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  84. GM5440612Courtesy of GENERAL MOTORS COMPANY

    Install the right side of the front bumper fascia (1) to the front bumper fascia guide (2) and the front headlamp (3).

  85. GM5440611Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Bolt (1) - Install and tighten [6x] - Fastener Specifications

  86. Raise and support the vehicle. Lifting and Jacking the Vehicle
  87. GM5440606Courtesy of GENERAL MOTORS COMPANY

    Install and tighten the left side upper front bumper fascia bolt (2). Fastener Specifications

  88. GM5440608Courtesy of GENERAL MOTORS COMPANY

    Install and tighten the right side upper front bumper fascia bolt (2). Fastener Specifications

  89. GM5440607Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Bolt- Right Side (3) - Install and tighten [2x] - Fastener Specifications

  90. GM5422180Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Install the left and right front wheelhouse liners (3).

  91. Front Wheelhouse Liner Retainer (2) - Install [8x]
  92. Front Wheelhouse Liner Bolt (1) - Install and tighten [14x] - Fastener Specifications
  93. GM5422163Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Front Bumper Fascia Air Deflector Bolt (1) - Install and tighten [6x] - Fastener Specifications

  94. Front Bumper Fascia Bolt (2) - Install and tighten [4x] - Fastener Specifications
  95. GM5421515Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • Left side shown, right side similar.
    • Quantity of fasteners may vary based on option content.
    • Components removed for graphic clarity.

    Engine Front Splash Shield (3) - Install [2x]

  96. Engine Front Splash Shield Retainer (2) - Install [4x]
  97. Engine Front Splash Shield Bolt (1) - Install and tighten [10x] - Fastener Specifications
  98. GM5394612Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • Left side shown, right side similar.
    • Quantity of fasteners may vary based on option content.

    Front Tire Front Air Deflector (2) - Install [2x]

  99. Front Tire Front Air Deflector Bolt (1) - Install and tighten [8x] - Fastener Specifications
  100. Install the tire and wheel assembly. Tire and Wheel Removal and Installation
  101. Lower the vehicle.
  102. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection