LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Frame And Underbody) >> Repair Instructions >> Front Wheelhouse Liner Replacement (Blackwing) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5867673Courtesy of GENERAL MOTORS COMPANY

    Front Wheelhouse Liner (3) - Install

    2. CAUTION:

    Refer to Fastener Caution

  2. Front Wheelhouse Liner Bolt (2) - Install and tighten [9x] - Fastener Specifications 
  3. Front Wheelhouse Liner Retainer (1) - Install [3x]
  4. GM5867323Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia Air Deflector- Outer (2) - Install

  5. Front Bumper Fascia Air Deflector Bolt (1) - Install and tighten [4x] - Fastener Specifications
  6. GM5869096Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Some components not shown for graphic clarity.

    Rocker Panel Protector (2) - Install

  7. Front Wheelhouse Liner Bolt (1) - Install and tighten [4x] - Fastener Specifications 
  8. GM5867672Courtesy of GENERAL MOTORS COMPANY
    NOTE:
    • Quantity of fasteners may vary based on option content.
    • Some components not shown for graphic clarity.

    Engine Front Splash Shield (3) - Install

  9. Engine Front Splash Shield Bolt (1) - Install and tighten [4x] - Fastener Specifications 
  10. Engine Front Splash Shield Retainer (2) - Install
  11. Install the tire and wheel assembly. Tire and Wheel Removal and Installation
scientia non olet · About LEMON Manuals