Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Lifting and Jacking the Vehicle
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Center Air Deflector Bolt (1) - Remove [5x]
Push Pin (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Front Wheelhouse Liner Bolt (1) - Remove
Push Pin (2) - Remove
Engine Front Splash Shield Bolt (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Wheelhouse Liner Bolt (3) - Remove
Push Pin (2) - Remove
Engine Front Splash Shield Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Compartment Air Deflector Bolt (1) - Remove [6x]
Courtesy of GENERAL MOTORS COMPANY

{ If equipped } Front Crossmember Brace Nut (1) - Remove [4x]
{ If equipped } Front Crossmember Brace (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Push Pin (2) @ Front Wheelhouse Liner (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Crossmember Brace Bolt (1) - Remove [4x]
Front Crossmember Brace Nut (2) - Remove
Front Crossmember Brace (3) - Remove