Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Starter(3) - Install
- Starter Bolt(2) - Install and tighten[2x] - Fastener Specifications
- Starter Stud(1) - Install and tighten - Fastener Specifications
Auxiliary Generator Battery Jumper Cable(2) - Install
- Battery Positive Cable Nut(1)@Starter Solenoid - Install and tighten - Fastener Specifications
Electrical Connector(1) - Connect
Auxiliary Generator Battery Jumper Cable(3) - Install
- Engine Wiring Harness Retainer(2) - Engage[2x]
- Auxiliary Generator Battery Jumper Cable Terminal Nut (1)@Starter Stud - Install and tighten - Fastener Specifications
Oil Level Indicator Tube Seal(2) - Install NEW
- Oil Level Indicator Tube(1) - Install
Oil Level Indicator Tube Bracket Bolt(1) - Install - Fastener Specifications
- Electrical Connector(1)@Oil Level Indicator(3) - Install
Oil Level Indicator(1) - Install
- Lower the vehicle.
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution