Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection
Battery Distribution Engine Compartment Fuse Block Cover(1) - Remove
- Battery Positive Cable Nut(6) - Remove
- Battery Positive Cable(7) - Remove
- Auxiliary Generator Battery Jumper Cable Nut(5) - Remove
- Auxiliary Generator Battery Jumper Cable(8) - Remove
- Engine Wiring Harness Terminal Nut (4) - Remove
- Engine Wiring Harness Terminal Nut (3) - Remove
- Engine Wiring Harness(9) - Remove[2x]
- Forward Lamp Wiring Harness Terminal Nut (2) - Remove[2x]
- Forward Lamp Wiring Harness(10) - Remove[2x]
Retaining Tab(1) - Disengage[2x]
- Battery Distribution Engine Compartment Fuse Block(2) - Remove
Battery Positive Cable Nut(1) - Remove
- Auxiliary Generator Battery Jumper Cable(2) - Remove
- Battery Positive Cable(3) - Remove
Retaining Tab(1) - Disengage[2x]
- Engine Wiring Harness Fuse Block Cover(2) - Remove
Engine Wiring Harness Junction Block Bolt(1) - Remove
- Retaining Tab(3) - Disengage[4x]
- Engine Wiring Harness Junction Block(2) - Remove
Disengage the 2 retaining covers (2), and remove the electrical connectors (1).
Disengage the 3 retaining tabs (1), from the body wiring harness junction block bracket (3), and remove the engine wiring harness fuse block bracket (2).