LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Mechanical - 2.0L (LSY) - Repair Instructions (3 Of 3)) >> Repair Instructions >> Oil Pump Screen Replacement (AWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    Leave the oil filter in place, or oil will continue to drip.

  1. Drain the engine oil. Engine Oil and Oil Filter Replacement (RWD) , or Engine Oil and Oil Filter Replacement (AWD) 
  2. GM5442544

    Remove wiring harness retainer.

  3. Lower Oil Pan Bolt (1) - Remove [18x]
    NOTE:
    1. Use the lower oil pan bolts in the provided jack screw (threaded inserts) in the oil pan. Tighten the jack screw by hand 1 to 2 turn each uniformly and move to the next screw until the oil pan has full separation from the LCE.
    2. Use care not to damage the LCE sealing surface.
  4. Lower Oil Pan (2) - Remove
  5. GM5443209

    Oil Pump Screen Bolt (1) - Remove

  6. Oil Pump Screen (2) - Remove
  7. Oil Pump Suction Pipe Gasket (3) - Remove and DISCARD
scientia non olet · About LEMON Manuals