LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Image Display Cameras) >> Diagnostic Information and Procedures >> Rear Vision Camera System Malfunction (UVB) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify A22 Radio Control displays infotainment system information properly.
    • Go to next step: If infotainment system information displays properly 
  2. Verify there is no debris on the B87 Rearview Camera lens and that the bezel and bezel seal are not damaged.
    • If debris is found on the lens 

      Clean the lens using water and a soft cloth. If the lens, bezel, or bezel seal are damaged, replace as necessary.

    • Go to next step: If there is no debris on the lens 
  3. Engine running, parking brake applied, transmission in REVERSE.
  4. Verify the backup lamps are illuminated.
    • Go to next step: If the backup lamps are illuminated 
  5. Engine running, parking brake applied, transmission in REVERSE.
  6. NOTE:

    A poor quality image is an image that has flickering, blinking, excessively blue/yellow hue, and/or fog/haze such that it obstructs the driver's view out the rear of the vehicle.

  7. Verify a clear rear vision image is displayed on the A22 Radio Control.
    • If a clear image is not displayed 

      Refer to Circuit/System Testing.

    • Go to next step: If a clear image is displayed 
  8. All OK.