Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Connect the electrical connector.
- Windshield Garnish Molding Bolt (2) - Install and tighten - Fastener Specifications
- Align the retainer clips with the slots in the A pillar and press the windshield garnish molding (1) into place.
- Windshield Garnish Molding (1) - Install
- Enable the SIR System.
CAUTION:
Refer to Fastener Caution .