LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior Trim And Paneling) >> Repair Instructions >> Front Side Door Armrest Switch Mount Plate Replacement - Passenger Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Front Side Door Trim - Remove - Front Side Door Trim Removal and Installation 
  2. GM5484098Courtesy of GENERAL MOTORS COMPANY

    Front Side Door Trim Bolt (1) - Remove

    GM5484110Courtesy of GENERAL MOTORS COMPANY
  3. Using a flat bladed plastic trim tool, start at the rear of the front side door armrest switch mount plate (1) and gently insert trim tool to lift the front side door armrest switch mount plate from the door trim.
  4. Rotate the front side door armrest switch mount plate (1) up and rearward to unhook the front retaining feature.
  5. Release the harness retainers to allow slack in harness, as needed.
  6. Disconnect the electrical connector.
  7. Front Side Door Armrest Switch Mount Plate (1) - Remove
  8. Transfer components as necessary.
scientia non olet · About LEMON Manuals