Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Rear Bumper Lower Fascia (1) - Install
Rear Bumper Fascia Diffuser (3) - Install
- Rear Bumper Fascia Diffuser Retainer (2) - Install [14x]
- Rear Bumper Fascia Diffuser Rivet (1) Install NEW [2x] - Fastener Specifications
- NOTE:
Right side shown, left side similar.
CAUTION:Refer to Fastener Caution .
Rear Fascia Signal Lamp- Left Side and Right Side Install [2x]
- Rear Fascia Lower Signal Lamp Bolt- Left Side and Right Side (1) Install and tighten [6x] Fastener Specifications
- NOTE:
Left side shown, right side similar.
Rear Bumper Fascia Extension- Left Side and Right Side (2) - Install [2x]
- Rear Bumper Fascia Extension Rivet- Left Side and Right Side (1) - Install NEW [8x] - Fastener Specifications
- Install the wiring harness and connect all electrical connectors.
With the aid of an assistant, install the fascia. (1) Rear Bumper Fascia Removal and Installation (without Blackwing) , or Rear Bumper Fascia Removal and Installation (with Blackwing)