Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Rear Bumper Fascia (1) - Remove - Rear Bumper Fascia Removal and Installation (without Blackwing) , or Rear Bumper Fascia Removal and Installation (with Blackwing)
- WARNING:
Refer to Eye Protection Warning .
Remove and discard the 2 low frequency rear bumper antenna rivets.
- Disconnect the electrical connector.
- Low Frequency Rear Bumper Antenna (2) - Remove
- Disconnect the rear parking sensor connector.
Rear Bumper Fascia Energy Absorber Clip (1) - Remove [4x]
- Rear Bumper Fascia Energy Absorber Bolt (2) - Remove [2x]
- Reposition the wiring harness.
- Rear Bumper Energy Absorber (3) - Remove