Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Front Bumper Fascia (1) - Remove - Front Bumper Fascia Removal and Installation (without Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing CFV, CFZ)
Forward Range Radar Bracket Bolt (1) - Remove [3x]
- Forward Range Radar Bracket (2) - Remove
- Disconnect the electrical connector.
Radiator Air Front Upper Baffle Retainer- Left Side (1) - Remove
- { If equipped } Radiator Air Lower Seal Retainer (2) - Remove [2x]
- Radiator Air Lower Baffle Retainer (3) - Remove [2x]
Front End Sheet Metal Cross Brace Bolt (1) - Remove [4x]
- Front End Sheet Metal Cross Brace (2) - Remove [2x]
Horn Bolt (1) - Remove [2x]
- Horn (2) - Reposition [2x]
Reposition the wiring harness.
- Front Bumper Impact Bar Bolt (1) - Remove [8x]
- Front Bumper Impact Bar (2) - Remove
NOTE:
Forward range radar sensor will be with the bracket.