Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Front Bumper Impact Bar (2) - Install
- Front Bumper Impact Bar Bolt (1) - Install and tighten [8x] - Fastener Specifications
- Install the wiring harness.
Horn (2) - Install [2x]
- Horn Bolt (1) - Install and tighten [2x] - Fastener Specifications
Front End Sheet Metal Cross Brace (2) - Install [2x]
- Front End Sheet Metal Cross Brace Bolt (1) - Install and tighten [4x] - Fastener Specifications
Radiator Air Front Upper Baffle Retainer- Left Side (1) - Install
- { If equipped } Radiator Air Lower Seal Retainer (2) - Install [2x]
- Radiator Air Lower Baffle Retainer (3) - Install [2x]
Forward Range Radar Bracket (2) - Install
- Forward Range Radar Bracket Bolt (1) - Install [3x] - Fastener Specifications
- Connect the electrical connector.
Front Bumper Fascia (1) - Install - Front Bumper Fascia Removal and Installation (without Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing CFV, CFZ)
CAUTION:
Refer to Fastener Caution .