Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Limited Slip Differential Clutch Motor Seal (2) - Install NEW
- Limited Slip Differential Clutch Motor (1) - Install
- CAUTION:
Refer to Fastener Caution .
Electronic Limited Slip Differential Control Module Bolt (1) - Install and tighten [4x] - Fastener Specifications
- Connect the limited slip differential clutch motor electrical connector.
- Verify the correct fluid level: Rear Axle Lubricant Level Inspection (LSY) , or Rear Axle Lubricant Level Inspection (L3B) , or Rear Axle Lubricant Level Inspection (LF4)
- Remove the support and lower the vehicle.