LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Engine Controls And Fuel - 2.7L (L3B) - Repair Instructions) >> Repair Instructions >> Turbocharger Bypass Valve Solenoid Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil fill cap.
  2. GM5432171

    Intake Manifold Cover Bolt (1) - Remove [2x]

  3. Lift up on the front of the intake manifold cover (2).
  4. GM5432174

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove

  5. GM5398955

    Air Cleaner Outlet Duct Clamp (1) - Loosen [2x]

  6. Evaporative Emission Canister Purge Tube (2) - Disconnect - Plastic Collar Quick Connect Fitting Service 
  7. Positive Crankcase Ventilation Tube (3) - Disconnect - Plastic Collar Quick Connect Fitting Service 
  8. Disconnect the electrical connector.
  9. GM5398967

    Air Cleaner Outlet Duct (1) - Remove

  10. GM5399125

    Disconnect the electrical connector.

  11. Compressor Air Intake Turbocharger Bypass Valve Solenoid Bolt (1) - Remove [3x]
  12. Turbocharger Bypass Valve Solenoid (2) - Remove
scientia non olet · About LEMON Manuals