LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Engine Controls And Fuel - 2.7L (L3B) - Repair Instructions) >> Repair Instructions >> Ignition Coil Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5404490

    Ignition Coil (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Ignition Coil Bolt (1) - Install and tighten [2x] - Fastener Specifications
  3. Connect the ignition coil electrical connector.
  4. GM5457786

    Upper Intake Manifold Bracket (2) - Install

  5. Upper Intake Manifold Cover Nut (1) - Install and tighten [2x] - Fastener Specifications
  6. GM5457857

    Radiator Surge Tank Inlet Hose Clip (2) @ Upper Intake Manifold Bracket (3) - Install

  7. Upper Intake Manifold Cover Nut (1) - Install and tighten [2x] - Fastener Specifications
  8. GM5457059

    Wiring Harness (2) - Reposition

  9. Electrical Connector (1) - Connect [5x]
  10. GM5432174

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install

  11. GM5432171

    Push down on the front of the intake manifold cover (2).

  12. Intake Manifold Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
  13. Install the oil fill cap.
scientia non olet · About LEMON Manuals