LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Engine Controls And Fuel - 2.7L (L3B) - Repair Instructions) >> Repair Instructions >> Fuel Pump Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5478583

    Fuel Pump Insulator (1) - Install

  2. GM5478561

    Fuel Injection Pump Bracket (3) - Install

    3. CAUTION:

    Refer to Fastener Caution .

  3. Fuel Pump Shield Bolt (2) - Install and tighten [2x] - Fastener Specifications
  4. Fuel Pump Shield Bolt (1) - Install and tighten [2x] - Fastener Specifications
  5. GM5457786

    Upper Intake Manifold Bracket (2) - Install

  6. Upper Intake Manifold Cover Nut (1) - Install and tighten [2x] - Fastener Specifications
  7. GM5457857

    Radiator Surge Tank Inlet Hose Clip (2) @ Upper Intake Manifold Bracket (3) - Install

  8. Upper Intake Manifold Cover Nut (1) - Install and tighten [2x] - Fastener Specifications
  9. GM5457059

    Electrical Connector (1) - Connect as necessary

  10. GM5432174

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install

  11. GM5432171

    Push down on the front of the intake manifold cover (2).

  12. Intake Manifold Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
  13. Install the oil fill cap.
  14. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals