Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Install the evaporative emission canister vent solenoid valve by rotating it counter-clockwise. (1)
Evaporative Emission Canister (1) - Install
Evaporative Emission Canister Air Inlet Hose (3) - Connect - Plastic Collar Quick Connect Fitting Service
- Fuel Tank Vent Hose (2) - Connect - Plastic Collar Quick Connect Fitting Service
- Evaporative Emission Canister Purge Hose (1) - Connect - Plastic Collar Quick Connect Fitting Service
Connect the electrical connector.
- Rear Wheelhouse Liner-Right Side - Install
- Retainer (3) - Install [2x]
- Push Pin (4) - Install
- Rear Wheelhouse Liner Screw (2) - Install and tighten [8x] - Fastener Specifications
- Rear Bumper Fascia Screw (1) - Install and tighten [2x] - Fastener Specifications
- Install the right rear tire and wheel assembly. Tire and Wheel Removal and Installation
Rear Tire Front Air Deflector (2) - Install
- Rear Tire Front Air Deflector Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution .