LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Engine Controls And Fuel - 2.7L (L3B) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Purge Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5395515

    Evaporative Emission Canister Purge Tube (1) - Install - Plastic Collar Quick Connect Fitting Service

  2. GM5456829
    NOTE:

    Ensure the intake manifold cover insulator retainers fully engage the intake manifold cover studs.

    Intake Manifold Cover Insulator (1) - Install

  3. GM5456746
    CAUTION:

    Refer to Fastener Caution .

    Intake Manifold Cover Bolt (1) - Install and tighten - Fastener Specifications

  4. GM5432174

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install

  5. GM5432171

    Push down on the front of the intake manifold cover (2).

  6. Intake Manifold Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
  7. Install the oil fill cap.
scientia non olet · About LEMON Manuals