LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Engine Controls And Fuel - 2.7L (L3B) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Air Inlet Hose Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
GM5403389
  1. Evaporative Emission Canister Air Inlet Hose (2) - Install
  2. Connect the quick disconnect and remove from the 2 retainers. Plastic Collar Quick Connect Fitting Service
  3. Install NEW tie strap. (1)
  4. GM5395767

    Rear Wheelhouse Liner (5) - Install

  5. Rear Wheelhouse Liner Retainer (3) - Install [2x]
  6. Rear Wheelhouse Liner Retainer (1) - Install
  7. CAUTION:

    Refer to Fastener Caution

  8. Rear Bumper Fascia Screw (4) - Install and tighten [2x] - Fastener Specifications
  9. Rear Wheelhouse Liner Bolt (2) - Install and tighten [8x] - Fastener Specifications
  10. GM5395705

    Rear Tire Front Air Deflector (2) - Install

  11. Rear Tire Front Air Deflector Bolt (1) - Install and tighten [2x] - Fastener Specifications
  12. Lower the vehicle.